New PC = New Problem
lug
28
Ciao ragassi/e
Il mio amato Lenovo Thinkpad T61P con cui giocavo è morto (un momento di raccoglimento…) … in realtà sarebbe stato quello di Drake, ma questa è un’altra storia…
Nessun problema adesso ho un nuovo fiammante luccicante DELL Precision M4400!!!
- Processore: Intel Core 2 Duo T9400 @ 2.53GHz
- Memoria: 4GB
- Scheda Video: Nvidia Quadro FX 1700M con 512MB di RAM dedicata
- Monitor 15.4 retroilluminato a LED 1920 x 1200
- Tastiera retroilluminata
Bellissimo! fa girare TF2 a 1920 x 1200 con modelli alti, ombre alte, HDR, ecc. tranquillamente sopra i 70 fps…per massimo mezz’ora!
Poi arriva il caldo e la macchina si siede! e quando dico si siede intento 10-15 fps.
Quindi che fare?
- Comprare un PC per il gaming? … non è aria…
- Rinunciare al gioco? … ma stiamo scherzando !?!?
- Giocare al massimo 30 minuti? … io sono niubbo, per fare 4 punti mi serve molto di più
E allora via alle soluzioni alternative… downclocking, apertura PC, preghiere, cariche di ghiaccio sotto il PC….
Ed ecco a voi la soluzione definitiva!!!
Ebbene si! ho tolto la “pancia” del PC per esporre CPU-GPU e relative heat pipe, ho sollevato la parte posteriore del PC e sparato aria con due sorprese delle uova di Pasqua della Kinder.
Ora riesco a giocare tranquillamente!!!
Le uniche controindicazioni sono che devo spiegare a mia figlia che fine hanno fatto i suoi ippopotamini volanti e a mio figlio dove sono finiti i suoi librettini della Disney…
Se trovo soluzioni più “professional” vi faccio sapere…
Nuovo aggiornamento: Grazie al buon “aLpHa” ho recuperato una termocamera e fatto alcune prove, ho fatto partire l’Intel Burn Test e un GPU stress utility e ho fatto aclune foto.
Questa è una visione termica dell’uscita aria del Dell come vedete le alette arrivano a circa 53 gradi.
Ecco il posteriore del PC (chiuso):
Come vedete a PC chiuso la temperatura del case esterno (in metallo) di circa 38 gradi mentre dalle (poche) griglie di aerazione vediamo che la temperatura interna de di quasi 10 gradi superiore. Questo ci dice che il calore sviluppato all’interno del PC NON viene trasmesso per conduzione al case esterno per essere dissipato.
Ora apriamo il giocattolo:
Come vedere ci sono due Heat pipe che portano il calore da CPU e GPU verso le alette raffreddate dalla ventola. La cosa strana secondo me è che mentre le heat pipe sono poco più che tiepide il case in alluminio della CPU è già a circa 65°C quindi il processore internamente lo è ancora di più (leggendo i sensori interni lo porto tranquillamente attorno ai 90°C)
Infine un piccolo dettaglio della solo CPU (che credo essere l’origine del problema).
Tenete conto che tutto questo con solo 20 minuti di stress test. Immaginate le temperature dopo 1h di TF2 intensivo….
Hi all!
My beloved Lenovo Thinkpad T61P which I used to play with is dead (one minute condolence …) … to be honest it should be the Drake’s one … but this is another story.
No problem, now I have a brand new shining DELL Precision M4400!!!
- Intel Core 2 Duo T9400 @ 2.53GH
- 4GB RAM
- Nvidia Quadro FX 1700M 512MB
- 15.4 LED 1920 x 1200
- Keyboard with backlight
Wonderfull! it runs TF2 at 1920 x 1200 with high models, high shadows, high dynamic range, etc etc over 70 fps with no problems….for at least half an hour.
Then comes the heat and the PC slow down !! e when I say slow down i mean 10-15 fps.
So what to do?
- By a new PC for gaming? … not exactly the right period…
- Give up the game? … are we kidding !?!?
- Playing for maximum 30 minutes? … I am a newbie, I need far more than 30 minutes to gather 4 point
So let’s start with “alternative solutions”… downclocking, opening up the PC, prays, Ice load below the PC…
And here’s the best solution!!!
Yes you are right! I take out the lower cover of the PC to expose CPU-GPU and their heat pipe, I’ve raised the back and shot air with two “Kinder Easter Egg Surprise”.
Now I can play without troubles !!!!
The only problems are that now I have to explain my doughter were her “flying-hippo” are and to my son what happened to his Disney books…
If I’ll find some more “professional” solution I will let you know…
OK updates… thanks to the good “aLpHa” i’ve gathered a thermocamera and made same tests, I’ve run the l’Intel Burn Test and a GPU stress utility and made some shots:
This is a thermal vision of the air-outlet of the Dell, as you can see the temperature of the copper reach 53°C.
Here’s the back of the PC (closed):
As you can see the external case temperature (metal) is around 38°C while looking into the (few) holes we see that the temparture is nearly 10°C higher. This tell me that the head generated internally is not “conducted” to the external case.
Now let’s open the toy:
As you can see there are two heat pipe that bing the heat from CPU and GPU to the colling zone in front of the fan. The strange thing (in my opinion) is that while the heat pipes are nearly cold the alluminim CPU case is already at 65°C, so the processor internally it’s surely hot! (reading the internal CPU sensors from the PC I can easly reacy 90°C)
Finally a small detail of the CPU (that I belive is the part overheating).
Keep in mind that all you’ve seen is after only 20 minutes of IntelStressTest. Now imagine the temperatures after 1h of intesive TF2….








Ci sono 12 commenti
Drake
luglio 28th, 2009
15:30
Grandissimo! Un bell’esempio di MacGyver modding
Drake(Cita)
Ikigami
luglio 28th, 2009
20:40
geniale. complimenti. nemmeno PA Baracus riuscirebbe a fare di meglio Ikigami(Cita)
saynot
luglio 29th, 2009
14:07
E’ un qualcosa a dir poco geniale! Complimenti! ^^ saynot(Cita)
aLpHa
luglio 29th, 2009
20:49
Vai Kinder-valsky
Però il pensierino di andare a lavorare con il dremmel sulla base del PC c’è ancora, vero? aLpHa(Cita)
Kovalski
luglio 30th, 2009
08:09
…Guarda….per essere sincero ho il pensierino di lavorare il PC con la dinamite…..
Per essere pratici: togliere la pancia credo sia anche togliere la schermatura a RAM/CPU/GPU e quindi non so che effetto avrebbe.
Penso che “industrializzerò” l’idea di base con un paio di ventoline 5V via USB e un supporto su misura…. ma per questo ci vuole tempo … magari durante le feri. Kovalski(Cita)
DAG
luglio 30th, 2009
13:09
Cavolo per raffreddare il mio ci vorrebbero minimo altri 2 kinder-turbreattori.. beato te kova che hai i bimbi che ti lasciano usufruire dei loro.. io non ho figli e di conseguenza nessun reattore. DOH! DAG(Cita)
Kovalski
luglio 31st, 2009
15:05
Ulteriori dettagli sulla soluzione:
http://www.teamoff.org/wp-content/uploads/IMG_0333.jpg
In più ho verificato che basta un’ippopotamo solo. Kovalski(Cita)
carlok
agosto 3rd, 2009
16:23
ma..oltre a farti i complimenti per la brillante soluzione….davvero bella ma sopratutto funzionale..
ho nottao che le piep son fredde e la cpu calda….smontare l’ambaradam e metterci un po di pasta termica per il verso…
l’ultimavolta che il mio portatile si spegneva per il caldo..lo ho smontato e ho visto che, in genere usano dei pad termici al posto della pasta e questi pad fanno da blocco al passaggio di calore..
ciao carlok(Cita)
Kovalski
agosto 3rd, 2009
18:17
Grazie Carlok
Avevo notato anche io il delta termico ma alla pasta non avevo pensato.
La settimana prossima che sono in ferie provo ad operare il paziente!!!
Grazie ancora
Ciao
Kova Kovalski(Cita)
carlok
agosto 5th, 2009
14:39
io userei la mx3….
http://www.arctic-cooling.com/catalog/main.php?cPath=39 carlok(Cita)
Dell M4400 Overheating Solved
ottobre 14th, 2009
23:26
New PC = New Problem = New Solution!
ottobre 14th, 2009
23:28
Lascia un commento